Delta HDPE 5012

About
Delta HDPE 5012是一种高密度聚乙烯产品,。它,在北美洲有供货。&&

Product Description
Generic	HDPE
Material Status	Commercial: Active
Features	High density
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.950	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	12	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	26.2	MPa	ASTM D638
Bending modulus	1030	MPa	ASTM D790
bending strength
yield	26.2	MPa	ASTM D790

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	140	J/m	ASTM D256

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Burning rate	< 100	mm/min	ISO 3795

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.