Stat-Rite® S-1180

About
Stat-Rite® S-1180 Polymers is an Inherently Dissipative Polymer (IDP) specially developed using Lubrizol’s patented Stat-Rite® IDP technology to impart permanent static dissipative property to acrylic resins. Blends of Stat-Rite® S-1180 Polymers with acrylics can be directly injection molded or extruded into the desired products. Typical loading of 10-25% shall impart surface resistivities of 10^9 – 10^11 ohm/square to the final products. FEATURES Permanently static dissipative Humidity independent APPLICATIONS Cleanroom accessories Electronic equipment parts and housing&&

About

Stat-Rite® S-1180 Polymers is an Inherently Dissipative Polymer (IDP) specially developed using Lubrizol’s patented Stat-Rite® IDP technology to impart permanent static dissipative property to acrylic resins. Blends of Stat-Rite® S-1180 Polymers with acrylics can be directly injection molded or extruded into the desired products. Typical loading of 10-25% shall impart surface resistivities of 10^9 – 10^11 ohm/square to the final products. FEATURES Permanently static dissipative Humidity independent APPLICATIONS Cleanroom accessories Electronic equipment parts and housing&&

Product Description
Supplier	Lubrizol Advanced Materials
Generic	SMMA
Material Status	Commercial: Active
Features	Rapid Static Decay,Antistatic property
Availabilitys	North America,Latin America,Asia Pacific,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.20	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	74	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	4.83	MPa	ASTM D638
Tensile strain
fracture	> 500	%	ASTM D638
Bending modulus	124	MPa	ASTM D790

Electrical performance	Nominal value	Unit	Test method
Electrostatic attenuation			CPM
1000V to 100V，50% R.H.	0.1	sec	CPM
1000V to 10V，50% R.H.	0.1	sec	CPM
Surface resistance
12% R.H.	4.0E+6	ohms	ESD S11.11
Surface resistivity
12% RH	4.0E+7	ohms/sq	ESD S11.11

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.