| About |
|---|
| AXIALLu0027s Georgia Gulf ProTherm® 4300E CPVC is a CPVC powder formulation designed for the processing of pipe products IPS Schedule 40/80 with an O.D. range of 1/2″ to 10 inches. ProTherm® 4300E CPVC is well suited for industrial grade systems where excellent chemical resistance is combined with excellent heat distortion properties and low flame and smoke generation |
| Product Description | |
|---|---|
| Supplier | Westlake Chemical |
| Generic | PVC，刚硬 |
| Material Status | Commercial: Active |
| Features | Low smoke,Solvent resistance |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.47 to 1.51 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| TD | 0.50 to 0.70 | % | ASTM D955 |
| PVC unit classification | 23447 | ASTM D1784 | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 2620 | MPa | ASTM D638 |
| Tensile strength | 49.1 | MPa | ASTM D638 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 3.2mm | 150 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 109 | ℃ | ASTM D648 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |