| About |
|---|
| Solef® 20808是一种聚偏二氟乙烯 (PVDF)材料,。 该产品在北美洲、非洲和中东、拉丁美洲、欧洲或亚太地区有供货,。 Solef® 20808的主要特性有: 低粘度 共聚物&& |
| Product Description | |
|---|---|
| Supplier | Solvay |
| Generic | PVDF |
| Material Status | Commercial: Active |
| Features | Low Viscosity,Copolymer,V-0 |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 230℃，2.16kg | 5.4 | g/10min | ASTM D1238 |
| Water absorption rate | |||
| 23℃，24hr | < 0.040 | % | ISO 62 |
| Density | 1.783 | g/cm³ | ISO 1183 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod Impact（notched V10 mm at 23℃，4mm thick） | 86.0 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 148 | ℃ | ASTM D3418 |
| specific heat | ASTM C351 | ||
| 23℃ | 1200 | J/kg/℃ | ASTM C351 |
| 100℃ | 1600 | J/kg/℃ | ASTM C351 |
| Thermal conductivity coefficient | |||
| 23℃ | 0.20 | W/m/K | ASTM C177 |
| Linear coefficient of thermal expansion | 1.4E-4 to 1.6E-4 | cm/cm/℃ | ASTM D696 |
| Crystallization heat | 35.0 | J/g | ASTM D3417 |
| Crystallization point | 120 | ℃ | ASTM D3418 |
| Glass transition temperature | |||
| Tg | -50.0 | ℃ | ASTM D4065 |
| Fusion heat | 35.0 | J/g | ASTM D3418 |
| thermal stability | |||
| weight loss 1% in air | 410 | ℃ |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | > 1.0E+14 | ohms | ASTM D257 |
| Volume resistivity | > 1.0E+14 | ohms·cm | ASTM D257 |
| Dielectric constant | |||
| 1 MHz | 6.80 | ASTM D150 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Extreme oxygen index | |||
| 3.0 mm | 44 | % | ASTM D2863 |
| Flame retardant level | V-0 | UL 94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| 23℃ | 1080 | MPa | ASTM D638 |
| tensile strength | |||
| Fracture, 23 ℃ | 56.0 | MPa | ASTM D638 |
| Yield, 23 ℃ | 33.0 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, 23 ℃ | 600 | % | ASTM D638 |
| Yield, 23 ℃ | 10 | % | ASTM D638 |
| abrasion resistance | 29.0 | mg | ASTM D4060 |
| friction coefficient | |||
| dynamic | 0.28 | ASTM D1894 | |
| Hardness (Shore D, 2.00 mm) | 71.0 | ASTM D2240 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |