| About |
|---|
| LOCTITE® PE 3141 Epoxy Resin is a resin formulated to offer improved long term performance at higher temperatures when mixed with LOCTITE® PE 3160 Epoxy Hardener. This mixture forms a resilient, long work time, no blush potting compound with good surface finish and bond strength to most thermoplastics.&& |
| Product Description | |
|---|---|
| Supplier | Henkel |
| Generic | 环氧树脂 |
| Material Status | Commercial: Active |
| Features | Good surface appearance,Elastic,Agglomerability |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.44 | g/cm³ | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 85 | ASTM D2240 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | 43.0 | ℃ | ASTM D3418 |
| Linear coefficient of thermal expansion | |||
| MD | |||
| < 43℃ | 6.1E-5 | cm/cm/℃ | |
| > 43℃ | 1.6E-4 | cm/cm/℃ |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | 5.7E+13 | ohms | ASTM D257 |
| Volume resistivity | 4.0E+15 | ohms·cm | ASTM D257 |
| Dielectric strength | 15 | kV/mm | ASTM D149 |
| Dielectric constant | |||
| 100 Hz | 4.30 | ||
| 1 kHz | 4.22 | ||
| 10 kHz | 4.14 | ||
| 100 kHz | 4.03 | ||
| Dissipation factor | |||
| 100 Hz | 0.010 | ||
| 1 kHz | 0.010 | ||
| 10 kHz | 0.020 | ||
| 100 kHz | 0.020 |
| Uncured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| colour | |||
| — | Black | ||
| — | Clear/Transparent | ||
| Weight Mix Ratio (PBW) | |||
| Resin | 4.0 | ||
| Hardener | 1.0 | ||
| Volume Mixing Ratio (PBV) | |||
| Resin | 2.5 | ||
| Hardener | 1.0 | ||
| Density | |||
| — | 0.998 | g/cm³ | |
| — | 1.61 | g/cm³ | |
| viscosity | |||
| 25℃ | 0.18 | Pa·s | |
| 25℃ | 7.0 | Pa·s | |
| 25℃ | 80 | Pa·s | |
| Curing time | |||
| 25℃ | 24 | hr | |
| Gelation time | |||
| 25℃ | 1.5E+2 to 2.1E+2 | min | |
| storage stability | |||
| 25 ℃ | 90 to 120 | min |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Resin |
| 3. Hardener |
| 4. Hardener, Spindle #1 @ 20 rpm |
| 5. Mixed, Spindle #5 @ 20 rpm |
| 6. Resin, Spindle #7 @ 20 rpm |
| 7. 400 g mass |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |