| About |
|---|
| MDPE 3802 is a medium density polyethylene with good resistance to impact and excellent Environmental Stress Crack Resistance (ESCR). It has been specifically designed for the blow moulding of flexible containers. It is particularly appropriate for the production of metal drum liners. MDPE 3802 is a pellet grade and contains antioxidants.&& |
| Product Description | |
|---|---|
| Supplier | TOTAL |
| Generic | MDPE |
| Material Status | Commercial: Active |
| Features | Good flexibility,High impact resistance,Inoxidizability,High ESCR |
| Availabilitys | Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.938 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，21.6kg | 20 | g/10min | ISO 1133 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 100% emulsifier, F50 | > 500 | hr | ASTM D1693B |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| -30℃ | 8.0 | kJ/m² | ISO 179 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Blowing molding temperature | 180 to 220 | ℃ |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |