SOLPLAST TC 4000D

About
Is a commercial name for thermoplastic elastomers (TPE – S) based on SBS (styrene – butadiene – styrene) block copolymers, gathered with mixing SBS. elastomers with polystyroles (GPPS, HIPS, EVA). Depending upon surface appearance and phisical characteristics can be used for all kinds of injectionmoulded soles. Resistance to acid, bases and all aqueous solutions is excellent. Resistance to alcohol and glycols is medium good. Resistance to aromatic hydrocarbons, fat and of oil is bad. All “SOLPLASTS” have a good electric-volume resistance: thats more then 1e12 ohm-cm. For coloring masters are used on a polyolefine base (PE, EVA). SERIES 4000 Mat or shine-mat surface with good expressed rubber-looked effect Expanded or compact surface look. Suitable for medium demanded thin and thick soles.&&

Product Description
GenericSBS
Material StatusCommercial: Active
FeaturesAlkali resistant,Acidproof
AvailabilitysEurope
Process MethodsInjection Molding

Technical Data
PHYSICALNominal valueUnitTest method
Density0.950 to 0.990g/cm³ISO 1183

MECHANICALNominal valueUnitTest method
Shore hardness
Shaw’s A56 to 80 ISO 868
tensile strength
yield4.50 to 5.50MPaISO 527-2
Tensile strain
fracture600 to 610%ISO 527-2
Abrasion210 to 250mm³

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.