Bynel® 2002 - SOLIAO

About
BYNEL® Series 2000 resins are acid modified ethylene acrylate resins. They contain a temperature stable ester which makes them functional in high temperature coextrusions. They are available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene (PE) resins. Applications BYNEL 2000 series resins adhere to a wide variety of materials. They are most often used to adhere to PE, EVA, Polyamide, ionomer, paper, aluminum foil, and printed films. BYNEL 2002 is designed for low melt temperature extrusion or coextrusion coating / laminating applications.&&

About

BYNEL® Series 2000 resins are acid modified ethylene acrylate resins. They contain a temperature stable ester which makes them functional in high temperature coextrusions. They are available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene (PE) resins. Applications BYNEL 2000 series resins adhere to a wide variety of materials. They are most often used to adhere to PE, EVA, Polyamide, ionomer, paper, aluminum foil, and printed films. BYNEL 2002 is designed for low melt temperature extrusion or coextrusion coating / laminating applications.&&

Product Description
Supplier	DuPont
Generic	EAA
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.93	g/cm³	ASTM D792
Melt Flow Rate
190℃，2.16kg	10.00	g/10min	ASTM D1238

THERMAL	Nominal value	Unit	Test method
Melting temperature	91	℃	ASTM D4591
Vicat Softening Temp
	60	℃	ASTM D1525

Process Conditions
Extrusion molding conditions	Nominal value	Unit	Test method
Zone 1 temperature	135	°C
Zone 3 temperature	235	°C
Zone 5 temperature	260	°C
Die temperature	260	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.