SABIC® HDPE B5421

About
SABIC® HDPE B5421 is typically used for blow moulding consumer packaging up to 5 l, combining a good stiffness with an high ESCR. This grade is typically used for packaging detergents, cleaners, shampoos and cosmetics at a high ESCR demand. This product is not intended for and must not be used in any pharmaceutical/medical applications.&&

Product Description
Supplier	SABIC
Generic	HDPE
Material Status	Commercial: Active
Features	Good Rigidity,High density,High ESCR
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.954	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	0.16	g/10min	ISO 1133
190℃，5.0kg	0.89	g/10min	ISO 1133

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	81	℃	ISO 75-2/Bf
Melting temperature	132	℃	ISO 11357-3
Vicat Softening Temp
A50	127	℃	ISO 306/A50

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	14.0	kJ/m²	ISO 180-1A
-30℃	6.0	kJ/m²	ISO 180-1A

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	61		ISO 868
tensile strength
23℃	27	MPa	ISO 527-2
Tensile strain
Fracture, 23 ℃	>1000	%	ISO 527-2
Tensile modulus
23℃	1050	MPa	ISO 527-2
bending strength
23℃	27	MPa	ISO 178
Bending modulus
23℃	1250	MPa	ISO 178

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.