Unilex™ UP.31.946

About
Unilex™ UP.31.946 is a High Density Polyethylene material. It is available in North America. Primary attribute of Unilex™ UP.31.946: High ESCR (Stress Crack Resistant). Typical application of Unilex™ UP.31.946: Food Contact Applications&&

Product Description
GenericHDPE
Material StatusCommercial: Active
FeaturesHigh density,High ESCR
AvailabilitysNorth America

Technical Data
PHYSICALNominal valueUnitTest method
Density0.946g/cm³ASTM D1505
Apparent density0.59g/cm³ASTM D1895
Melt Flow Rate
190℃,2.16kg0.31g/10minASTM D1238

IMPACTNominal valueUnitTest method
Tensile impact strength137kJ/m²ASTM D1822

THERMALNominal valueUnitTest method
Embrittlement temperature-75.0ASTM D746
Vicat Softening Temp123ASTM D1525

MECHANICALNominal valueUnitTest method
Shore hardness
Shaw’s D65 ASTM D2240
tensile strength
yield24.8MPaASTM D638
Tensile strain
fracture500%ASTM D638
Bending modulus
1% secant896MPaASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.