About |
---|
ACRYLITE® Soundstop NT CC is a highly filled, non-transparent grade of cast acrylic. Properties In addition to the well-known and proven properties of ACRYLITE®, such as extremely high weather resistance ease of fabrication high surface hardness low weight 100% recyclability, Applications These properties make ACRYLITE® Soundstop NT especially suitable for noise control along roads and railways wind barriers on bridges&& |
Product Description | |
---|---|
Supplier | Evonik |
Generic | SMMA |
Material Status | Commercial: Active |
Features | Weather resistance is good,Renewable resources,Good Hardness,noise reduction,Machinable |
Availabilitys | North America |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Density | 1.67 | g/cm³ | ISO 1183 |
MECHANICAL | Nominal value | Unit | Test method |
---|---|---|---|
Tensile modulus | 7200 | MPa | ISO 527-2/1B/5 |
tensile strength | 37.0 | MPa | ISO 527-2/1B/5 |
Tensile strain | |||
fracture | 2.0 | % | ISO 527-2/1B/5 |
bending strength | 62.0 | MPa | ISO 178 |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
Vicat Softening Temp | |||
B50 | 105 | ℃ | ISO 306 |
Linear coefficient of thermal expansion | |||
MD:0~50℃ | 7.0E-5 | 1/℃ | DIN 53752-A |
Maximum operating temperature | 70 | ℃ |
Supplementary information | Nominal value | Unit | Test method |
---|---|---|---|
Weight per Unit Area(1.20 cm) | 20.0 | kg/m² | |
Weighted Sound Reduction Index | EN 1793-2 | ||
1.20 cm | 30.0 | dB | EN 1793-2 |
1.50 cm | 34.0 | dB | EN 1793-2 |
2.00 cm | 35.0 | dB | EN 1793-2 |
Notes |
---|
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |