| About |
|---|
| Bionate® II 55D is a Polycarbonate + TPU (PC+TPU) product. It can be processed by extrusion or injection molding and is available in North America. Applications of Bionate® II 55D include medical/healthcare and food contact applications. Characteristics include: Good Mold Release Good Toughness High Strength Wear Resistant&& |
| Product Description | |
|---|---|
| Supplier | DSM |
| Generic | PC+TPU |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good flexibility,Aromatic,Good stripping performance,Inoxidizability,Good wear resistance |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | 35 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| MD | 0.80 to 2.3 | % | ASTM D955 |
| Water absorption rate | |||
| saturated | 0.54 | % | ASTM D750 |
| Average molecular weight | 231000 | Mw | Internal Method |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | 1.00 | ℃ | ASTM E1356 |
| Vicat Softening Temp | 107 | ℃ | ASTM D1525 |
| Melting temperature | 180 | ℃ | ASTM E1356 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric strength | 17 | kV/mm | ASTM D149 |
| Dielectric constant | |||
| 60 Hz | 3.71 | ASTM D150 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 56 | ASTM D2240 | |
| tensile strength | ASTM D1708 | ||
| fracture | 61.8 | MPa | ASTM D1708 |
| 50% strain | 13.6 | MPa | ASTM D1708 |
| 100% strain | 18.1 | MPa | ASTM D1708 |
| 300% strain | 49.0 | MPa | ASTM D1708 |
| Tensile strain | |||
| fracture | 370 | % | ASTM D1708 |
| Bending modulus | |||
| 1% secant | 95.1 | MPa | ASTM D790 |
| bending strength | |||
| 5% strain | 3.52 | MPa | ASTM D790 |
| friction coefficient | |||
| With oneself – dynamic | 0.46 | ASTM D1894 | |
| Taber abraser | |||
| 1000 cycles, 1000 g, H-18 wheels | 11.0 | mg | ASTM D1044 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Extrusion | Nominal value | Unit | Test method |
| Processing (melt) temperature | 191 to 218 | °C | |
| Melt temperature | 177 to 210 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 224°C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |