INEOS HDPE K44-08-122

About
K44-08-122 is a natural high density polyethylene copolymer designed specifically for extrusion of potable water, industrial, and mining pipe. It is recognized by the Plastic Pipe Institute as having a pipe material designation code of PE 3608 (formerly PE 3408), NSF Standard 14 certification, and complies with ANSI/NSF Standard 61 for health effects requirements. A pressure rated formulation is also produced when this product is extruded in combination with an INEOS-approved black masterbatch. The resulting formulation known as K44-08-123 has NSF Standard 14 certification and complies with ANSI/NSF Standard 61 health effects requirements, is certified to CSA Standard B137.1-05 and B137.4-05, and is also listed with the Plastic Pipe Institute as a PE 3608 (formerly PE 3408).&&

About

K44-08-122 is a natural high density polyethylene copolymer designed specifically for extrusion of potable water, industrial, and mining pipe. It is recognized by the Plastic Pipe Institute as having a pipe material designation code of PE 3608 (formerly PE 3408), NSF Standard 14 certification, and complies with ANSI/NSF Standard 61 for health effects requirements. A pressure rated formulation is also produced when this product is extruded in combination with an INEOS-approved black masterbatch. The resulting formulation known as K44-08-123 has NSF Standard 14 certification and complies with ANSI/NSF Standard 61 health effects requirements, is certified to CSA Standard B137.1-05 and B137.4-05, and is also listed with the Plastic Pipe Institute as a PE 3608 (formerly PE 3408).&&

Product Description
Supplier	INEOS
Generic	HDPE copolymer
Material Status	Commercial: Active
Features	Copolymer,High density
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.944	g/cm³	ASTM D4883
Melt Flow Rate			ASTM D1238
190℃，21.6kg	9.0	g/10min	ASTM D1238
190℃，5.0kg	0.45	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
100% non-ionic detergent, F50	> 1000	hr	ASTM D1693B

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	66		ASTM D2240
tensile strength
fracture	27.6	MPa	ASTM D638
yield	20.7	MPa	ASTM D638
Tensile strain
fracture	600	%	ASTM D638
yield	12	%	ASTM D638
Bending modulus
2% secant	765	MPa	ASTM D790-A

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	320	J/m	ASTM D256
Area	31.6	kJ/m²	ASTM D256

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	< -118	℃	ASTM D746
Vicat Softening Temp	126	℃	ASTM D1525
Oxygen sensing time
210℃	> 20	min	ASTM D3895
thermal stability	127	℃	ASTM D3350

Supplementary information	Nominal value	Unit	Test method
Cell Classification	345464A		ASTM D3350
Slow crack propagation PENT – Notch Tensile	> 100	hr	ASTM F1473

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.