T & T Marketing TPE 5595CR

About
TPE 5595CR is a natural, olefin-based thermoplastic elastomer (TPE) intended for wire and cable insulation and jacketing applications where high temperature performance and excellent flame resistance are required. TPE 5595CR complies with “Restriction of Hazardous Substances” Directive, Citation 2002-95-EC, commonly known as RoHS without exemption. TPE 5595CR does not contain decabromodiphenyl oxide. TPE 5595CR exhibits excellent wet and dry electrical properties and superior chemical resistance. It also provides good resistance to abrasion, impact and crush. TPE 5595CR also exhibits superior low temperature properties as demonstrated by it passing cold bend and impact testing at -50°C. TPE 5595CR contains a halogen-based, flame retardant additive package designed to reduce normal PE flame spread characteristics and achieve a VW-1 flame resistant rating on 14 AWG wires and larger. It also offers good extrusion processing characteristics on either conventional polyethylene or PVC extrusion lines. In addition, TPE 5595CR contains a UV stabilization additive package that provides effective long-term UV weather resistance. TPE 5595CR is readily pigmented to a variety of colors using standard wire and cable color concentrates designed for thermoplastic or crosslinked polyolefins. Application TPE 5595CR is intended for 125°C UL rated appliance wire and other flame retardant insulation or jacketing constructions. Specifically, this product is rated a V-0 by UL Standard 94 at a minimum thickness of 0.062 inches. TPE 5595CR is capable of achieving a VW-1 flame resistance on 14 AWG or larger conductors as per UL Standard 1581.&&

About

TPE 5595CR is a natural, olefin-based thermoplastic elastomer (TPE) intended for wire and cable insulation and jacketing applications where high temperature performance and excellent flame resistance are required. TPE 5595CR complies with “Restriction of Hazardous Substances” Directive, Citation 2002-95-EC, commonly known as RoHS without exemption. TPE 5595CR does not contain decabromodiphenyl oxide. TPE 5595CR exhibits excellent wet and dry electrical properties and superior chemical resistance. It also provides good resistance to abrasion, impact and crush. TPE 5595CR also exhibits superior low temperature properties as demonstrated by it passing cold bend and impact testing at -50°C. TPE 5595CR contains a halogen-based, flame retardant additive package designed to reduce normal PE flame spread characteristics and achieve a VW-1 flame resistant rating on 14 AWG wires and larger. It also offers good extrusion processing characteristics on either conventional polyethylene or PVC extrusion lines. In addition, TPE 5595CR contains a UV stabilization additive package that provides effective long-term UV weather resistance. TPE 5595CR is readily pigmented to a variety of colors using standard wire and cable color concentrates designed for thermoplastic or crosslinked polyolefins. Application TPE 5595CR is intended for 125°C UL rated appliance wire and other flame retardant insulation or jacketing constructions. Specifically, this product is rated a V-0 by UL Standard 94 at a minimum thickness of 0.062 inches. TPE 5595CR is capable of achieving a VW-1 flame resistance on 14 AWG or larger conductors as per UL Standard 1581.&&

Product Description
Generic	TPE
Material Status	Commercial: Active
Features	Weather resistance is good,High impact resistance,Good Electrical Properties,Flame Characteristics,Good wear resistance,Solvent resistance,Halogenated,V-0
Availabilitys	North America
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.34	g/cm³	ASTM D792

elastic body	Nominal value	Unit	Test method
tensile strength
0.762 mm	20.0	MPa	ASTM D412
Tensile strain
Fracture, 0.762 mm	600	%	ASTM D412

Aging performance	Nominal value	Unit	Test method
Tensile strength retention rate
7 days at 136℃，762.0 µm	> 90	%	UL 1581
Elongation retention rate

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	< -45.6	℃	ASTM D746

Electrical performance	Nominal value	Unit	Test method
Volume resistivity
1.91 mm	1.6E+16	ohms·cm	ASTM D257
Dielectric strength
1.91 mm	26	kV/mm	ASTM D149
Dielectric constant
1.91 mm，60 Hz	2.40		ASTM D150
Dissipation factor
1.91 mm，60 Hz	2.7E-3		ASTM D150

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	V-0		UL 94
Extreme oxygen index	28	%	ASTM D2863

MECHANICAL	Nominal value	Unit	Test method
Shore hardness			ASTM D2240
Shaw A, 0.762 mm	93		ASTM D2240
Shore D, 0.762 mm	41		ASTM D2240
Bending modulus
0.76 mm	359	MPa	ASTM D790

Process Conditions
Extrusion	Nominal value	Unit	Test method
Barrel 1 zone temperature	188	°C
Barrel 2 zone temperature	199	°C
Barrel 3 zone temperature	204	°C
Barrel 4 zone temperature	210	°C
Melt temperature	210	°C
Nozzle temperature	210 to 232	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.