Propylux® CN-F

About
PROPYLUX® CN-F (Conductive Polypropylene) Non-sloughing, carbon-fiber-filled material with good chemical resistance, high strength and stiffness, and good temperature resistance to 215° F. This material is light weight, easily machined and fabricated, and has good overall mechanical properties. Advantages: Very good chemical resistance Easily machined Cost effective Durable Lightweight Weldable Applications: Semiconductor/electronic components Automotive assembly equipment Business machine manufacturing components Explosives handling equipment&&

About

PROPYLUX® CN-F (Conductive Polypropylene) Non-sloughing, carbon-fiber-filled material with good chemical resistance, high strength and stiffness, and good temperature resistance to 215° F. This material is light weight, easily machined and fabricated, and has good overall mechanical properties. Advantages: Very good chemical resistance Easily machined Cost effective Durable Lightweight Weldable Applications: Semiconductor/electronic components Automotive assembly equipment Business machine manufacturing components Explosives handling equipment&&

Product Description
Supplier	Westlake Plastics
Generic	PP not specified
Material Status	Commercial: Active
Features	Good Rigidity,Conductive,No shedding,Machinable,High Heat Resistance,Durability,Solvent resistance,Antistatic property,Welding,HB
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.978	g/cm³	ASTM D792
Water absorption rate
24hr	0.010	%	ASTM D570

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	59	J/m	ASTM D256
Notched impact strength of cantilever beam	240	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	121	℃	ASTM D648

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	1.0E+2 to 1.0E+6	ohms	ASTM D257
Volume resistivity	1.0E+2 to 1.0E+6	ohms·cm	ASTM D257
Electrostatic attenuation	< 0.1	sec	MIL B-81705

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	HB		UL 94

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	63		ASTM D2240
tensile strength
yield	65.5	MPa	ASTM D638
Tensile strain
fracture	2.5	%	ASTM D638
Bending modulus	5170	MPa	ASTM D790
bending strength	75.8	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.