| About |
|---|
| Andur 900-AP是一种聚氨酯（聚脂/聚醚混合，TDI）（PUR-酯/醚，TDI）产品,。 它可以通过浇铸进行加工,在北美洲有供货。 特性包括: 水解稳定性 耐化学品&& |
| Product Description | |
|---|---|
| Generic | PUR-酯/醚+TDI |
| Material Status | Commercial: Active |
| Features | Hydrolysis stability,Solvent resistance |
| Availabilitys | North America |
| Process Methods | casting |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Apparent density | 1.14 | g/cm³ | ASTM D1895 |
| Shrinkage rate | |||
| MD | 1.6 | % | ASTM D955 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ASTM D412 | ||
| yield | 41.8 | MPa | ASTM D638 |
| 100% strain | 9.63 | MPa | ASTM D412 |
| 200% strain | 14.8 | MPa | ASTM D412 |
| 300% strain | 25.9 | MPa | ASTM D412 |
| Compression deformation | 28 | % | ASTM D395 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| storage stability | |||
| 70 ℃ | 4.0 to 6.0 | min |
| Thermosetting mixed viscosity | Nominal value | Unit | Test method |
|---|---|---|---|
| 70℃ | 2660 | cP | ASTM D2393 |
| stripping time | |||
| 100℃ | 180 | min |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 90 | ASTM D2240 | |
| Tensile strain | |||
| yield | 550 | % | ASTM D638 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |