Eraclene® PF 92

About
Eraclene PF 92 is a homopolymer high density polyethylene resin (HDPE), with antioxidants, suitable for pipe application. It is characterized by high rigidity, high impact strength and low swelling. Eraclene PF 92 has an intermediate molecular weight distribution which perfectly balances overall performances with ease of processing. Main Application Eraclene PF 92 is recommended for the production of structured wall pipes when high rigidity is required. It can be used for the production of sheets and profiles.&&

About

Eraclene PF 92 is a homopolymer high density polyethylene resin (HDPE), with antioxidants, suitable for pipe application. It is characterized by high rigidity, high impact strength and low swelling. Eraclene PF 92 has an intermediate molecular weight distribution which perfectly balances overall performances with ease of processing. Main Application Eraclene PF 92 is recommended for the production of structured wall pipes when high rigidity is required. It can be used for the production of sheets and profiles.&&

Product Description
Generic	HDPE
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,High impact resistance,Food contact compliance,Inoxidizability,High density,Homopolymer
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.960	g/cm³	ISO 1183
Melt Flow Rate			ISO 1133
190℃，2.16kg	0.70	g/10min	ISO 1133
190℃，21.6kg	45	g/10min	ISO 1133
190℃，5.0kg	2.6	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D, molded	66		ISO 868
tensile strength
Fracture, molded	30.0	MPa	ISO 527-2
Yield, molding	31.0	MPa	ISO 527-2
Tensile strain
Fracture, molded	> 800	%	ISO 527-2
Bending modulus
Compression Molding	1500	MPa	ISO 178

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	< -60.0	℃	ASTM D746
Vicat Softening Temp	128	℃	ISO 306/A
Melting temperature	138	℃	Internal Method

Process Conditions
Extrusion	Nominal value	Unit	Test method
Barrel 1 zone temperature	170 to 180	°C
Barrel 2 zone temperature	185 to 195	°C
Melt temperature	200 to 220	°C
Nozzle temperature	185 to 195	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.