Jampilen EP302K

About
Jampilen EP302K is a medium flow, heterophasic polypropylene copolymer. This grade combines excellent stiffness with high impact and is suitable for injection molding and thermoforming. Due to its particular balance of mechanical properties, Jampilen EP302K is widely used for injection molding toys, sports articles, small containers, housewares, closures and caps. Technical applications are components for appliances and parts for the automotive industry. Thermoformed containers are another important application of Jampilen EP302K. This grade is suitable for food contact.&&

About

Jampilen EP302K is a medium flow, heterophasic polypropylene copolymer. This grade combines excellent stiffness with high impact and is suitable for injection molding and thermoforming. Due to its particular balance of mechanical properties, Jampilen EP302K is widely used for injection molding toys, sports articles, small containers, housewares, closures and caps. Technical applications are components for appliances and parts for the automotive industry. Thermoformed containers are another important application of Jampilen EP302K. This grade is suitable for food contact.&&

Product Description
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good Rigidity,High impact resistance,Food contact compliance,Moderate liquidity,Copolymer
Availabilitys	Africa & Middle East ,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	3.5	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
-20℃	25	J/m
23℃	120	J/m

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	90.0	℃	ASTM D648
Vicat Softening Temp	152	℃	ASTM D1525 1
Accelerate oven aging
150℃	360	hr	ASTM D3012

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	94		ASTM D785
tensile strength
yield	29.0	MPa	ASTM D638
Tensile strain
yield	9.0	%	ASTM D638
Bending modulus	1250	MPa	ASTM D790

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.