| About |
|---|
| Elastoprene HS5150D is a flexible TPE/TPO hybrid intended for injection molding applications, offering good processibility, easy coloring, good heat resistance, improved flexural fatigue and FDA compliance. Applications: Food containers, food closures, storage containers, general industrial and consumer goods applications.&& |
| Product Description | |
|---|---|
| Generic | Polyolefin Elastomer |
| Material Status | Commercial: Negative |
| Features | Excellent Processability,Good flexibility,Food contact compliance,Heat Resistance, Good,Good coloring |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.970 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 25 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ASTM D2240 | ||
| Shore D, 10 seconds, extrusion molding | 48 | ASTM D2240 | |
| Shore D, 10 seconds, injection molding | 50 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 15.3 | MPa | ASTM D412 |
| 100% strain | 5.45 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 600 | % | ASTM D412 |
| tear strength | 74.0 | kN/m | ASTM D624 |
| Compression deformation | ASTM D395B | ||
| 23℃，22 hr | 52 | % | ASTM D395B |
| 70℃，22 hr | 71 | % | ASTM D395B |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | -50.0 | ℃ | ASTM D746 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Barrel rear temperature | 171 to 199 | °C | |
| Barrel middle temperature | 177 to 210 | °C | |
| Barrel front temperature | 191 to 221 | °C | |
| Nozzle temperature | 199 to 229 | °C | |
| Processing (melt) temperature | 199 to 221 | °C | |
| Mold temperature | 10 to 49 | °C | |
| Injection pressure | 5.17 to 8.96 | MPa | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |