EVALENE® HDPE HP10441

About
EVALENE ® HP10441 provides a cost-effective solution for various piping applications including potable water, sewer, industrial, agricultural, mining, landfll, electrical and elecommunications duct applications. Pipes made using EVALENE ® HP10441 are flexible, have excellent fatigue, impact and abrasion resistance. They are corrosion-resistant and ensure no scale deposits nor heavy metal contamination. Pipes made using EVALENE ® HP10441 will retain a hoop-strength of at least 8.0 MPa even after 50 years of use. EVALENE ® HP10441 is effective for above-ground, buried, trenchless, floating and even marine installations. At 20°C usage condition **UV stablized; black pipe FEATURES Good processability and flexibility Certified MRS 8.0 material (PE 80) Meets Philippine FDA food contact requirements Halal-certified TYPICAL APPLICATIONS FEATURES Pressure pipe applications (PE 80) Pipes for building & construction Smooth wall and corrugated pipes for electrical conduits, telecommunications, irrigation and sewage&&

About

EVALENE ® HP10441 provides a cost-effective solution for various piping applications including potable water, sewer, industrial, agricultural, mining, landfll, electrical and elecommunications duct applications. Pipes made using EVALENE ® HP10441 are flexible, have excellent fatigue, impact and abrasion resistance. They are corrosion-resistant and ensure no scale deposits nor heavy metal contamination. Pipes made using EVALENE ® HP10441 will retain a hoop-strength of at least 8.0 MPa even after 50 years of use*. EVALENE ® HP10441 is effective for above-ground**, buried, trenchless, floating and even marine installations. *At 20°C usage condition **UV stablized; black pipe FEATURES Good processability and flexibility Certified MRS 8.0 material (PE 80) Meets Philippine FDA food contact requirements Halal-certified TYPICAL APPLICATIONS FEATURES Pressure pipe applications (PE 80) Pipes for building & construction Smooth wall and corrugated pipes for electrical conduits, telecommunications, irrigation and sewage&&

Product Description
Generic	HDPE
Material Status	Commercial: Active
Features	Good Rigidity,Good flexibility,Solvent resistance,High ESCR
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.944	g/cm³	ASTM D1505
Melt Flow Rate
190℃，21.6kg	10	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
50 ℃, 10% non-ionic surfactant, F50	> 1000	hr	ASTM D1693B

THERMAL	Nominal value	Unit	Test method
Oxygen sensing time	110	min

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	61		ASTM D2240
Tensile modulus
1% cut, molded	1030	MPa	ASTM D638
tensile strength			ASTM D638
Yield, molding	21.0	MPa	ASTM D638
Fracture, molded	31.0	MPa	ASTM D638
Tensile strain			ASTM D638
Yield, molding	19	%	ASTM D638
Fracture, molded	1600	%	ASTM D638
Bending modulus
injection molding	857	MPa	ASTM D790

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	230 to 260	°C

Notes
1. Typical properties: these are not to be construed as specifications.
2. 23°C
3. 0.20 in/min
4. 2.0 in/min
5. 0.051 in/min
6. DSC, 200°C
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.