| About |
|---|
| A soft, colorable SEBS based thermoplastic elastomer (TPE) compound that offers good physical properties and chemical resistance. Bondable to: PP, EVA, PE&& |
| Product Description | |
|---|---|
| Generic | SEBS |
| Material Status | Commercial: Active |
| Features | Block Copolymer,Solvent resistance,Soft,Good coloring,Agglomerability |
| Availabilitys | Africa & Middle East ,North America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.960 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| TD | 1.5 | % | ASTM D955 |
| MD | 2.0 | % | ASTM D955 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 57 | ASTM D2240 | |
| Abrasion | 150 | mm³ | ASTM D1630 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 8.00 | MPa | ASTM D412 |
| 300% strain | 2.90 | MPa | ASTM D412 |
| 100% strain | 1.80 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 900 | % | ASTM D412 |
| tear strength | 29.0 | kN/m | ASTM D624 |
| Compression deformation | ASTM D395 | ||
| 23℃，22 hr | 17 | % | ASTM D395 |
| 70℃，22 hr | 42 | % | ASTM D395 |
| 100℃，22 hr | 74 | % | ASTM D395 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Ozone resistance | |||
| Stressed | No Cracks | ASTM D518 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Proposed maximum recycled material ratio | 20 | % | |
| Barrel rear temperature | 145 to 175 | °C | |
| Barrel middle temperature | 155 to 185 | °C | |
| Barrel front temperature | 160 to 190 | °C | |
| Nozzle temperature | 175 to 205 | °C | |
| Mold temperature | 25 to 50 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |