| About |
|---|
| Geon™ Vinyl Flexible C70T0 is a Flexible Polyvinyl Chloride product. It can be processed by coextrusion or extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Sealing Applications. Primary characteristic: low gloss.&& |
| Product Description | |
|---|---|
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Features | Low Gloss |
| Availabilitys | Europe,Asia Pacific,North America,Latin America,Africa & Middle East |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.34 | g/cm³ | ASTM D792 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | 39.2 | kN/m | ASTM D624 |
| Compression deformation | |||
| 23℃，22 hr | 21 | % | ASTM D395 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | -46.1 | ℃ | ASTM D746 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ASTM D2240 | ||
| Shaw’s A | 70 | ASTM D2240 | |
| Shore A, 15 seconds | 66 | ASTM D2240 | |
| tensile strength | ASTM D638 | ||
| fracture | 8.69 | MPa | ASTM D638 |
| 100% strain | 4.09 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 360 | % | ASTM D638 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion molding | Nominal value | Unit | Test method |
| injection molding | Nominal value | Unit | Test method |
| Melt Temperature | 171 to 177 | °C | |
| Melt Temperature | 193 to 199 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 20 in/min |
| 3. Die C, 20 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |