| About |
|---|
| Hepla® H7330 GF 15TF is a Polyamide 46 (PA46) product filled with Glass fiber and 15% PTFE.Characteristics include: Strong, stiff parts. Improved friction and wear behaviour. Optimised for dry running operations. |
| Product Description | |
|---|---|
| Supplier | NFD |
| Generic | PA 46 |
| Material Status | Commercial: Active |
| Features | Lubricating |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.5 | g/cm³ | ISO 1183 |
| Water absorption rate | |||
| 24 hr，23℃ | 1.5 | % | ISO 62 |
| Shrinkage rate | 0.2 to 0.5 | % | DIN 16742 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 10800 | MPa | ISO 527-2/1 |
| tensile strength | 152 | MPa | ISO 527-2/50 |
| Tensile strain | |||
| yield | 2.2 | % | ISO 527-2/50 |
| Bending modulus | |||
| 2.0 mm/min | 8200 | MPa | ISO 178 |
| bending strength | |||
| 10 mm/min | 230 | MPa | ISO 178 |
| Bending strain | |||
| Fracture, 10 mm/min | 2.8 | % | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 80x10x4mm | 10.2 | kJ/m² | ISO 179/1eA |
| Charpy Unnotch Impact strength | |||
| 80x10x4mm | 46 | kJ/m² | ISO 179/1eU |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Continuous use temperature | |||
| 20,000 hrs | 150 | ℃ | IEC 60216 |
| Vicat Softening Temp | 290 | ℃ | ISO 306/A |
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 285 | ℃ | ISO 75-2/A |
| service time | |||
| Lifetime, 200 hr | 240 | ℃ |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | |||
| 4.00 mm | > 1.0E +12 | ohms | IEC 60093 |
| Strip electrode R25 | > 1.0E +12 | ohms | IEC 60167 |
| Process Conditions | |||
|---|---|---|---|
| Processing technology | Nominal value | Unit | Test method |
| drying temperature | |||
| Desiccant Dryer | 80 | ℃ | |
| Vacuum Dryer | 80 | ℃ | |
| Drying time | |||
| Desiccant Dryer | 2.0 to 8.0 | hr | |
| Vacuum Dryer | 2.0 to 12.0 | hr | |
| Maximum moisture content | 0.1 | % | |
| Temperature at the rear of the barrel | 285 to 315 | ℃ | |
| Temperature in the middle of the barrel | 305 to 315 | ℃ | |
| Front temperature of material barrel | 305 to 315 | ℃ | |
| Nozzle Temperature | 280 to 330 | ℃ | |
| Melt Temperature | 310 | ℃ | |
| Mold temperature | 90 to 130 | ℃ | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |