Stat-Rite® S-1107

About
Stat-Rite® S-1107 is a static dissipative TPU alloy. Stat-Rite S-1107 utilizes the patented Stat-Rite inherently dissipative polymer (IDP) alloy system to provide clean, permanent ESD protection. Stat-Rite® IDP alloys provide consistent static dissipation even when extruded, injection molded or thermoformed into components. FEATURES Permanent static dissipative Humidity insensitive Ultra-clean: low off-gassing, low ionic contamination Colorable Durable: Can be used for years and years APPLICATIONS Cleanroom Conveyor wear strips Electronic component handling Cleanroom Softwall Curtains Cleanroom tubing and hose Cleanroom Conveyor Rollers&&

About

Stat-Rite® S-1107 is a static dissipative TPU alloy. Stat-Rite S-1107 utilizes the patented Stat-Rite inherently dissipative polymer (IDP) alloy system to provide clean, permanent ESD protection. Stat-Rite® IDP alloys provide consistent static dissipation even when extruded, injection molded or thermoformed into components. FEATURES Permanent static dissipative Humidity insensitive Ultra-clean: low off-gassing, low ionic contamination Colorable Durable: Can be used for years and years APPLICATIONS Cleanroom Conveyor wear strips Electronic component handling Cleanroom Softwall Curtains Cleanroom tubing and hose Cleanroom Conveyor Rollers&&

Product Description
Supplier	Lubrizol Advanced Materials
Generic	其他TPU合金
Material Status	Commercial: Active
Features	High purity,Rapid Static Decay,Low (to None) Ion Content,Electrostatic discharge protection,Low odor,Durability,Antistatic property,Good coloring
Availabilitys	North America,Latin America,Asia Pacific,Europe
Process Methods	Thermo forming

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.21	g/cm³	ASTM D792

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	83		ASTM D412

elastic body	Nominal value	Unit	Test method
tensile strength			ASTM D412
fracture	11.5	MPa	ASTM D412
50% strain	4.52	MPa	ASTM D412
100% strain	5.21	MPa	ASTM D412
200% strain	6.43	MPa	ASTM D412
Tensile strain
fracture	700	%	ASTM D412

Electrical performance	Nominal value	Unit	Test method
Electrostatic attenuation
1000V to 100V，50% R.H.	0.1	sec	CPM
5000V to 50V，12% R.H.	< 2.0	sec	FTMS 101C
-5000V to -50V，12% R.H.	< 2.0	sec	FTMS 101C
Surface resistance
12% R.H.	4.8E+7	ohms	ESD S11.11
Volumetric resistance	2.3E+8	ohms	ESD S11.12

Supplementary information	Nominal value	Unit	Test method
Filler	IDP Alloy

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.