| About |
|---|
| Fine Polyethersulfone powder, e.g. for membrane applications, coatings and resin modification, containing min. 50% of OH-endgroups. The product has a typical particle size below 100 µm and is soluble in N-methyl-pyrrolidone (NMP) and N,N-Dimethylacetamide (DMAc). This grade is not suitable for thermoplastic moulding / extrusion.&& |
| Product Description | |
|---|---|
| Supplier | BASF |
| Generic | PES |
| Material Status | Commercial: Active |
| Availabilitys | Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Apparent density | 0.30 | g/cm³ | ISO 60 |
| Water absorption rate | |||
| Equilibrium, 23 ℃, 50% RH | 1.0 | % | ISO 62 |
| Viscosity number | 59.0 | cm³/g | ISO 307 |
| molecular weight | |||
| GPC in DMAc | 55000 | g/mol | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. in 0,01 g/ml Phenol/1,2, ortho-Dichlorbenzol, 1:1 |
| 3. PMMA standard |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |