| About |
|---|
| For blown films with paper like quality, suitable for counter bags, carried bags and w/aping films, excellent processing. Features High molar mass film grade, good stiffness and tenacity Applications blown Film&& |
| Product Description | |
|---|---|
| Supplier | Jam |
| Generic | HDPE |
| Material Status | Commercial: Negative |
| Features | Good Rigidity,Excellent Processability,Inoxidizability,High molecular weight,Lubricating |
| Availabilitys | Africa & Middle East ,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.949 | g/cm³ | ISO 1183 |
| Melt Flow Rate | ISO 1133 | ||
| 190℃，21.6kg | 8.0 | g/10min | ISO 1133 |
| 190℃，5.0kg | 0.28 | g/10min | ISO 1133 |
| Flow Rate Ratio（21.6/5） | 29.0 | ||
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Fish Eye | < 3.00 | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. FRR values are statistical and calculated by dividing MFR values. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |