Elastocon® 2880L

About
Elastocon® 2880L thermoplastic elastomer has been developed for applications that require rubber-like properties and a reduced coefficient of friction. Elastocon® 2880L is FDA compliant and well suited for consumer goods and industrial applications. Elastocon® 2880L can be overmolded onto polypropylene. Elastocon® 2880L is supplied as ready to use pellets in 50 lb. bag quantities.&&

Product Description
Generic	TPE
Material Status	Commercial: Active
Availabilitys	North America,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D792

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	80		ASTM D2240

elastic body	Nominal value	Unit	Test method
tensile strength	6.70	MPa	ASTM D412
100% strain	4.80	MPa	ASTM D412
Tensile strain
fracture	420	%	ASTM D412
tear strength	39.8	kN/m	ASTM D624
Compression deformation
70℃，22 hr	18	%	ASTM D395B

Process Conditions
injection	Nominal value	Unit	Test method
Extrusion	Nominal value	Unit	Test method
Barrel rear temperature	166 to 177	°C
Barrel front temperature	182 to 188	°C
Nozzle temperature	193 to 204	°C
Mold temperature	21 to 38	°C
Injection speed	快速
Back pressure	0.689 to 1.38	MPa
Screw compression ratio	2.5:1.0 to 3.0:1.0
Barrel temperature	79	°C
Barrel 1 zone temperature	149	°C
Barrel 5 zone temperature	177	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.