Vibrathane® B604

About
VIBRATHANE B-604 is a polyether-based TDI terminated prepolymer which yields a 75D hardness urethane when cured with 4,4′-methylene-bis-(orthochloroaniline). VIBRATHANE B-604 is characterized by exceptionally low viscosity and when cured with 4,4′-methylene-bis-(orthochloroaniline) has: Very high modulus and tensile Low coefficient of friction Good machineability High heat- distortion temperature Excellent humid aging resistance Good impact resistance&&

About

VIBRATHANE B-604 is a polyether-based TDI terminated prepolymer which yields a 75D hardness urethane when cured with 4,4′-methylene-bis-(orthochloroaniline). VIBRATHANE B-604 is characterized by exceptionally low viscosity and when cured with 4,4′-methylene-bis-(orthochloroaniline) has: Very high modulus and tensile Low coefficient of friction Good machineability High heat- distortion temperature Excellent humid aging resistance Good impact resistance&&

Product Description
Supplier	Chemtura
Generic	PUR-脂肪族+TDI
Material Status	Commercial: Active
Features	High impact resistance,Low Viscosity,Low coefficient of friction,Machinable,Moisture resistance,Good Tensile Strength
Availabilitys	North America,Latin America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.21	g/cm³	ASTM D792

elastic body	Nominal value	Unit	Test method
tensile strength	55.2	MPa	ASTM D412
100% strain	34.5	MPa	ASTM D412
Tensile strain
fracture	210	%	ASTM D412
tear strength
cracking	21	kN/m	ASTM D470
Compression deformation
70℃，22 hr	1.0	%	ASTM D395A
70℃，22 hr	55	%	ASTM D395B
Basho’s elasticity	35	%	ASTM D2632

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	750 to 960	J/m	ASTM D256

Uncured Properties	Nominal value	Unit	Test method
Curing time
100℃	16	hr

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	75		ASTM D2240
Bending modulus	965	MPa	ASTM D790

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	-57.0	℃	ASTM D746
storage stability	1.5	min
stripping time	15	min

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.