PERCOM® NCC30

About
NYCOA 567 is a general-purpose unextracted Nylon 6 resin, which offers superior flexibility and toughness in both molding and extrusion applications. It has a moderately high melt viscosity, excellent processability, and yields extremely tough and resilie NYCOA 567 resin has acceptance in diversified fields from grass cutting-line, to extruded soft-hand fishing line, and other monofilament applications. It is available with custom additive packages: heat stabilizer, UV stabilizer, flame retardant and/or cu NYCOA 567 can be certified to MIL-M-22096, Type IVA Nylon.&&

About

NYCOA 567 is a general-purpose unextracted Nylon 6 resin, which offers superior flexibility and toughness in both molding and extrusion applications. It has a moderately high melt viscosity, excellent processability, and yields extremely tough and resilie NYCOA 567 resin has acceptance in diversified fields from grass cutting-line, to extruded soft-hand fishing line, and other monofilament applications. It is available with custom additive packages: heat stabilizer, UV stabilizer, flame retardant and/or cu NYCOA 567 can be certified to MIL-M-22096, Type IVA Nylon.&&

Product Description
Supplier	A. Schulman
Generic	PP copolymer
Material Status	Commercial: Active
Features	Weather resistance is good,Excellent Processability,Good flexibility,High Viscosity,Elastic,HB
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.19	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	16	g/10min	ISO 1133
Shrinkage rate	0.80 to 1.3	%

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	55
tensile strength
yield	16.0	MPa	ISO 527-2
Bending modulus	1800	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	6.0	kJ/m²	ISO 180-1A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	70.0	℃	ISO 75-2/A
0.45 MPa, unannealed	120	℃	ISO 75-2/B
Vicat Softening Temp
A50	150	℃	ISO 306/A50

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	HB		UL 94

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.