Eltex® B4020N1332

About
Eltex® B4020N1332 is a high-density polyethylene copolymer particularly intended for the injection moulding and compression moulding of screw caps for the packaging beverages. It is especially suitable for applications requiring high environmental stress cracking resistance. Thanks to high purity and excellent organoleptic properties, this grade is particularly intended for the packaging in direct contact with beverages. Typical applications Caps & closures for the packaging of carbonated soft drinks Benefits and Features Very good stress cracking resistance Excellent processing performances High impact strength Excellent, quality controlled organoleptic properties. In order to preserve the excellent organoleptic properties, it is important not to exceed a melt temperature of 250°C during processing. Grade containing slip agent ensuring easy application and opening. Exposure to direct sunlight has to be avoided as the slip agent is light sensitive and its degradation can give off-taste to the beverage.&&

About

Eltex® B4020N1332 is a high-density polyethylene copolymer particularly intended for the injection moulding and compression moulding of screw caps for the packaging beverages. It is especially suitable for applications requiring high environmental stress cracking resistance. Thanks to high purity and excellent organoleptic properties, this grade is particularly intended for the packaging in direct contact with beverages. Typical applications Caps & closures for the packaging of carbonated soft drinks Benefits and Features Very good stress cracking resistance Excellent processing performances High impact strength Excellent, quality controlled organoleptic properties. In order to preserve the excellent organoleptic properties, it is important not to exceed a melt temperature of 250°C during processing. Grade containing slip agent ensuring easy application and opening. Exposure to direct sunlight has to be avoided as the slip agent is light sensitive and its degradation can give off-taste to the beverage.&&

Product Description
Supplier	INEOS
Generic	HDPE copolymer
Material Status	Commercial: Active
Features	Excellent Processability,High purity,High impact resistance,Smoothness,Good sensory characteristics.,Copolymer,High density,High ESCR
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.952	g/cm³	ISO 1872
Melt Flow Rate
190℃，2.16kg	1.9	g/10min	ISO 1133
ESCR(Environmental Stress Cracking Resistance)	16.0	hr	Internal Method

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	1100	MPa	ISO 527-2/1B
tensile strength
yield	25.0	MPa	ISO 527-2/1B

IMPACT	Nominal value	Unit	Test method
Charpy Unnotch Impact strength
23℃	6.0	kJ/m²	ISO 179

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.