| About |
|---|
| Romiloy® 8150 is a Polycarbonate + ASA (PC+ASA) material. It is available in Europe for extrusion or injection molding. Important attributes of Romiloy® 8150 are: Flame Rated Halogen Free Flame Retardant&& |
| Product Description | |
|---|---|
| Generic | ASA+PC |
| Material Status | Commercial: Active |
| Features | Halogen free,Flame Characteristics,No antimony,V-0 |
| Availabilitys | Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.18 | g/cm³ | ISO 1183 |
| Melt Flow Rate | ISO 1133 | ||
| 240℃，5.0kg | 20 | g/10min | ISO 1133 |
| 260℃，5.0kg | 35 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| 23℃ | 2600 | MPa | ISO 527-1-2 |
| tensile strength | |||
| Yield, 23 ℃ | 60.0 | MPa | ISO 527-2/50 |
| Tensile strain | |||
| Fracture, 23 ℃ | 30 | % | ISO 527-2/50 |
| Bending modulus | |||
| 23℃ | 2500 | MPa | ISO 178 |
| bending strength | |||
| 23℃ | 94.0 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 35 | kJ/m² | ISO 179/1eA |
| Charpy Unnotch Impact strength | |||
| 23℃ | 无断裂 | ISO 179/1eU |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | |||
| B50 | 110 | ℃ | ISO 306 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 1.50 mm | V-0 | UL 94 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Extrusion | Nominal value | Unit | Test method |
| Drying temperature | 60 to 80 | °C | |
| Drying time | 2.0 to 4.0 | hr | |
| Recommended maximum moisture content | 0.050 | % | |
| Proposed maximum recycled material ratio | 5 | % | |
| Processing (melt) temperature | 210 to 240 | °C | |
| Mold temperature | 60 to 80 | °C | |
| Drying temperature | < 80 | °C | |
| Drying time | 2.0 to 4.0 | hr | |
| Recommended maximum moisture content | < 0.050 | % | |
| Barrel 1 zone temperature | 200 to 240 | °C | |
| Barrel 2 zone temperature | 200 to 240 | °C | |
| Barrel 3 zone temperature | 200 to 240 | °C | |
| Barrel 4 zone temperature | 200 to 240 | °C | |
| Barrel 5 zone temperature | 200 to 240 | °C | |
| Melt temperature | < 250 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.079 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |