| About |
|---|
| Vyteen PC/ABS 3016 is a black 16% glass fiber reinforced Polycarbonate/ABS alloy designed for injection molding Features Good processability Balanced stiffness / resilience High Deflection Temperature Daimler Chrysler MSDB-206 type II compliant Typical Applications Automotive Structural frames Appliances&& |
| Product Description | |
|---|---|
| Supplier | Lavergne |
| Generic | PC+ABS |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Excellent Processability,Elastic |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | |||
| — | 1.22 | g/cm³ | ASTM D792 |
| 23℃ | 1.20 | g/cm³ | ISO 1183 |
| Shrinkage rate | |||
| MD：2.0 mm | 4.9 to 6.5 | % | ASTM D955 |
| 3.2 mm | 0.30 to 0.50 | % | ISO 294-4 |
| Ash Content | |||
| — | 16 | % | ASTM D2584 |
| — | 16 | % | ISO 3451 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 80.0 | MPa | ASTM D638 |
| fracture | 75.0 | MPa | ISO 527-2/5 |
| Bending modulus | |||
| — | 5300 | MPa | ASTM D790 |
| — | 5250 | MPa | ISO 178 |
| bending strength | |||
| — | 140 | MPa | ASTM D790 |
| — | 120 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/A | ||
| -30℃ | 6.0 | kJ/m² | ISO 179/A |
| 23℃ | 8.0 | kJ/m² | ISO 179/A |
| Impact strength of cantilever beam notch | ASTM D256 | ||
| -30℃ | 85 | J/m | ASTM D256 |
| 23℃ | 93 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 112 | ℃ | ASTM D648，ISO 75-2/A |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Burning rate | 100 | mm/min | SAE J369 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 90 | °C | |
| Drying time | 2.0 to 4.0 | hr | |
| Recommended maximum moisture content | 0.020 | % | |
| Barrel rear temperature | 200 to 230 | °C | |
| Barrel middle temperature | 240 to 250 | °C | |
| Barrel front temperature | 260 to 275 | °C | |
| Nozzle temperature | 270 to 280 | °C | |
| Processing (melt) temperature | 240 to 260 | °C | |
| Mold temperature | 40 to 60 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.20 in/min |
| 3. 0.051 in/min |
| 4. 0.079 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |