Ingeo™ 3D860

About
Ingeo™ 3D860 is a grade developed for manufacturing 3D printer monofilament. Engineered to deliver improved heat-resistance and high impact strength to 3D printed parts, this formulated grade achieves thermal and mechanical properties similar to ABS while offering an alternative to styrenic-based materials. Monofilaments made with Ingeo 3D860 provide excellent 3D printing characteristics such as precise detail, good adhesion to build plates, less warping or curling, and low odor.&&

About

Ingeo™ 3D860 is a grade developed for manufacturing 3D printer monofilament. Engineered to deliver improved heat-resistance and high impact strength to 3D printed parts, this formulated grade achieves thermal and mechanical properties similar to ABS while offering an alternative to styrenic-based materials. Monofilaments made with Ingeo 3D860 provide excellent 3D printing characteristics such as precise detail, good adhesion to build plates, less warping or curling, and low odor.&&

Product Description
Generic	PLA
Material Status	Commercial: Negative
Features	Low warping,High impact resistance,Renewable resources,Crystal,Food contact compliance,Low odor,Good bond,Compostable
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.22	g/cm³	ASTM D792
Melt Flow Rate
210℃，2.16kg	5.0 to 7.0	g/10min	ASTM D1238
Relative viscosity
30℃	4.00		ASTM D5225

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	2400	MPa	ASTM D638
tensile strength			ASTM D638
yield	32.8	MPa	ASTM D638
—	30.0	MPa	ASTM D638
Tensile strain
fracture	2.3	%	ASTM D638

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	320	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	80.0 to 90.0	℃	ASTM E2092
Glass transition temperature	55.0 to 60.0	℃	ASTM D3418
Crystallization peak temperature
DSC	165 to 180	℃	ASTM D3418

Process Conditions
Extrusion	Nominal value	Unit	Test method
Barrel 1 zone temperature	179	°C
Barrel 2 zone temperature	191	°C
Barrel 3 zone temperature	199	°C
Connector temperature	199	°C
Melt temperature	210	°C
Nozzle temperature	199	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.