Ebalta AH 100 / TGL

About
ebalta AH 100 is a very thin, unfilled epoxy resin, which can be used with different hardeners. Depending on the application the suitable hardener can be mixed with the resin AH 100. AH 100 / TGL is preferentially used for big volume backfillings. Applications Laminating resin for fabrics Bonding resin for fillers Properties unfilled slow curing for large volume back fillings&&

Product Description
Generic	环氧树脂
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Asia Pacific,Europe

Technical Data
IMPACT	Nominal value	Unit	Test method
Charpy Unnotch Impact strength	27 to 47	kJ/m²	ISO 179

Uncured Properties	Nominal value	Unit
Density
20℃	1.10 to 1.14	g/cm³
viscosity
25℃	0.45 to 0.65	Pa·s
Curing time
20℃	18 to 20	hr
storage stability
20 ℃	65 to 75	min

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	84 to 90		ISO 7619
Bending modulus	2800 to 3200	MPa	ISO 178
bending strength	100 to 110	MPa	ISO 178
compressive strength	92.0 to 108	MPa	ISO 604

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	74.0 to 78.0	℃	ISO 75-2/B
Thermosetting components
resin	按重量计算的混合比: 100
Hardening method	按重量计算的混合比: 20

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.