Loyblend® TA-1030FR

About
Loyblend® TA-1030FR is a flame retardant PC/ABS alloy compound. The flame retardant system give excellent flame retardancy with balance mechanical properties.&&

Product Description
Generic	PC+ABS
Material Status	Commercial: Active
Features	High impact resistance,Good liquidity,Halogen free,Flame Characteristics,V-0
Availabilitys	Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.17	g/cm³	ASTM D792
Melt Flow Rate
260℃，2.16kg	20	g/10min	ASTM D1238
Shrinkage rate
MD：3.2 mm	0.40 to 0.60	%	ASTM D955
Water absorption rate
24hr	0.10	%	ASTM D570

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	510	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed, 4.0 mm	80.0	℃	ASTM D648

Electrical performance	Nominal value	Unit	Test method
Surface resistivity	> 1.0E+14	ohms	ASTM D257

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
1.60 mm	V-0		UL 94

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	120		ASTM D785
Tensile modulus	2800	MPa	ASTM D638
tensile strength	58.0	MPa	ASTM D638
Tensile strain
fracture	> 50	%	ASTM D638
Bending modulus	2700	MPa	ASTM D790
bending strength	90.0	MPa	ASTM D790

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	80 to 90	°C
Drying time	4.0 to 6.0	hr
Barrel rear temperature	210 to 230	°C
Barrel middle temperature	220 to 240	°C
Barrel front temperature	225 to 250	°C
Nozzle temperature	230 to 250	°C
Mold temperature	50 to 90	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.