| About |
|---|
| The Honeywell Halar® E-Series ECTFE film is a high performance film with excellent mechanical, electrical and release properties. It is non-flammable, and has outstanding chemical resistance. Halar E-Series Film is available in the following colors: Blue, White and Clear.&& |
| Product Description | |
|---|---|
| Supplier | Honeywell |
| Generic | PCTFE |
| Material Status | Commercial: Active |
| Features | Good Electrical Properties,Good stripping performance,Solvent resistance |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.68 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| friction coefficient | ASTM D1894 | ||
| &Metal – Dynamic | 0.28 | ASTM D1894 | |
| With oneself – dynamic | 0.58 | ASTM D1894 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Secant modulus | ASTM D882 | ||
| MD | 1860 | MPa | ASTM D882 |
| TD | 1550 | MPa | ASTM D882 |
| tensile strength | ASTM D882 | ||
| MD, yield | 35.2 | MPa | ASTM D882 |
| TD, yield | 31.0 | MPa | ASTM D882 |
| MD, fracture | 71.7 | MPa | ASTM D882 |
| TD, fracture | 57.6 | MPa | ASTM D882 |
| Tensile strain | ASTM D882 | ||
| MD, fracture | 240 | % | ASTM D882 |
| TD, fracture | 290 | % | ASTM D882 |
| Water vapor transmittance | |||
| 38℃，100% RH | 0.098 | g·mm/m²/atm/24 hr | ASTM F1249 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Crystallization peak temperature | |||
| DSC | 240 | ℃ | ASTM D3418 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |