| About |
|---|
| Features Produce accurate QuickCast™ patterns Excellent humidity/moisture resistance Free of antimony for cleaner burnout&& |
| Product Description | |
|---|---|
| Generic | Polycarbonate |
| Material Status | Commercial: Active |
| Features | Moisture resistance |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | |||
| — | 1.12 | g/cm³ | |
| — | 1.15 | g/cm³ | |
| viscosity | |||
| 30℃ | 0.205 | Pa·s | |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Notched impact strength of cantilever beam | 35 to 50 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 62.0 | ℃ | ASTM D648 |
| Glass transition temperature | 57.0 | ℃ | DMA |
| Linear coefficient of thermal expansion | |||
| MD：25~50℃ | 1.0E-4 | 1/℃ | ASTM E831 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Critical Exposure | 9.98 | mJ/cm² | |
| Penetration depth | 145.8 | µm |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 87 | ||
| Tensile modulus | 1940 to 2350 | MPa | ASTM D638 |
| tensile strength | 45.0 to 48.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 9.0 to 19 | % | ASTM D638 |
| Bending modulus | 2200 to 2480 | MPa | ASTM D790 |
| bending strength | 81.0 to 83.0 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Liquid, 25°C |
| 3. Solid, 25°C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |