| About |
|---|
| Monprene CP-38225 XRD2 is a high performance thermoplastic elastomer designed for a variety of consumer product applications requiring a soft, rubber-like feel. Monprene CP-38225 XRD2 is a low hardness, low density, clear grade that is suitable for both injection molding and extrusion.&& |
| Product Description | |
|---|---|
| Supplier | Teknor Apex |
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Smoothness,Good bond,Lubricating,Low density,Moderate liquidity,Low Hardness,Solvent resistance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.878 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 13 | g/10min | ASTM D1238 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ASTM D412 | ||
| TD, 100% strain | 0.600 | MPa | ASTM D412 |
| MD, 100% strain | 0.731 | MPa | ASTM D412 |
| tensile strength | ASTM D412 | ||
| TD, 300% strain | 1.34 | MPa | ASTM D412 |
| MD, 300% strain | 1.81 | MPa | ASTM D412 |
| tensile strength | ASTM D412 | ||
| fracture | 7.05 | MPa | ASTM D412 |
| MD, fracture | 6.90 | MPa | ASTM D412 |
| Tensile strain | ASTM D412 | ||
| fracture | 560 | % | ASTM D412 |
| Flow rate, fracture | 520 | % | ASTM D412 |
| tear strength | ASTM D624 | ||
| TD | 23.3 | kN/m | ASTM D624 |
| MD | 21.2 | kN/m | ASTM D624 |
| Compression deformation | |||
| 23℃，22 hr | 19 | % | ASTM D395B |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ASTM D2240 | ||
| Shore A, 1 second, injection molding | 28 | ASTM D2240 | |
| Shore A, 5 seconds, injection molding | 25 | ASTM D2240 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Extrusion | Nominal value | Unit | Test method |
| Barrel rear temperature | 171 to 204 | °C | |
| Barrel middle temperature | 171 to 204 | °C | |
| Barrel front temperature | 171 to 204 | °C | |
| Nozzle temperature | 171 to 204 | °C | |
| Processing (melt) temperature | 171 to 204 | °C | |
| Mold temperature | 16 to 32 | °C | |
| Injection pressure | 1.38 to 5.52 | MPa | |
| Injection speed | Fast | ||
| Back pressure | 0.172 to 0.689 | MPa | |
| Screw speed | 50 to 100 | rpm | |
| Cushion | 3.81 to 25.4 | mm | |
| Barrel 1 zone temperature | 160 to 193 | °C | |
| Barrel 2 zone temperature | 160 to 193 | °C | |
| Barrel 3 zone temperature | 160 to 193 | °C | |
| Barrel 4 zone temperature | 160 to 193 | °C | |
| Barrel 5 zone temperature | 160 to 193 | °C | |
| Nozzle temperature | 160 to 193 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Die C, 20 in/min |
| 3. Type 1 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |