抚顺 DFDA-7042

About

Product Description
SupplierFushun
GenericLinear low density polyethylene
Material StatusCommercial: Negative

Technical Data
PHYSICALNominal valueUnitTest method
Density0.920 g/cm³
Melt index1.80g/10min

MECHANICALNominal valueUnitTest method
Tensile stress
yield9.80MPa
fracture13.8MPa
elongation at break≥400kg/cm²

Supplementary informationNominal valueUnitTest method
fisheye
0.8mm0个/1520cm²
0.4mm17个/1520cm²

optical performanceNominal valueUnitTest method
Haze23.6%

Notes
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.