| About |
|---|
| Product Description | |
|---|---|
| Supplier | Khouzestan |
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 190℃，2.16kg | 1.8-2.2 | g/10min | ASTM D1238 |
| Density | |||
| 23℃ | 0.920-0.924 | g/ml | ASTM D1505 |
| sharpe ratio | ＜30 | ASTM D1238 | |
| Yellowness value | 0.5 | ASTM D1925 | |
| Titanium content | 2 | ppm wt | MTM 15636 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Haze | 13 | % | ASTM D1003 |
| gloss | 90 | % | ASTM D2457 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Dart Impact | 60 | g | ASTM D1709 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Yield, TD | 13 | MPa | ASTM D882 |
| Yield, MD | 12 | MPa | ASTM D882 |
| Fracture, TD | 38 | MPa | ASTM D882 |
| Fracture, MD | 40 | MPa | ASTM D882 |
| Tensile strain | |||
| Fracture, TD | 1000 | % | ASTM D882 |
| Fracture, MD | 850 | % | ASTM D882 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |