| About |
|---|
| MARPOL® HDB 505G is a high molecular weight high density polyethylene copolymer. It has a combination of excellent processability, melt strength, high impact strength, chemical resistance and high stress cracking resistance.&& |
| Product Description | |
|---|---|
| Generic | HDPE copolymer |
| Material Status | Commercial: Active |
| Features | Excellent Processability,High impact resistance,High molecular weight,Good melt strength,Copolymer,Solvent resistance,High ESCR |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.950 | g/cm³ | ASTM D4883 |
| Melt Flow Rate | ASTM D1238 | ||
| 190℃，2.16kg | < 0.10 | g/10min | |
| 190℃，21.6kg | 5.5 | g/10min | |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 100% non-ionic detergent | > 1000 | hr | ASTM D1693B |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 20.7 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 1100 | % | ASTM D638 |
| Bending modulus | 1030 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile impact strength | |||
| 23℃ | 420 | kJ/m² | ASTM D1822 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | < -76.1 | ℃ | ASTM D746 |
| Vicat Softening Temp | 127 | ℃ | ASTM D1525 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |