ADDINYL A2 G30

About
ADDINYL® A2 G30 is a Polyamide 66 (Nylon 66) material filled with 30% glass bead. It is available in Africa & Middle East, Asia Pacific, Europe, or Latin America. Important attributes of ADDINYL® A2 G30 are: Good Dimensional Stability Good Stiffness Typical applications include: Automotive Engineering/Industrial Parts Appliances&&

Product Description
Generic	PA66
Material Status	Commercial: Active
Features	Good Rigidity,Good Dimensional Stability
Availabilitys	Africa & Middle East ,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.35	g/cm³	ISO 1183/A

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength	3.0	kJ/m²	ISO 179-1eA
Charpy Unnotch Impact strength	40	kJ/m²	ISO 179/1eU
Impact strength of cantilever beam notch	3.5	kJ/m²	ISO 180-1A

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	95.0	℃	ISO 75-2/Af
Melting temperature
DSC	260	℃	ISO 3146
Linear coefficient of thermal expansion
MD	6.0E-5	1/℃	ASTM E831

Electrical performance	Nominal value	Unit	Test method
Volume resistivity	1.0E+15	ohms·cm	IEC 60093
Dielectric strength	30	kV/mm	IEC 60243-1
Compared to the leakage tracing index
Solution A	600	V	IEC 60112

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	87		ISO 868
tensile strength
fracture	80.0	MPa	ISO 527-2
Tensile strain
fracture	7.0	%	ISO 527-2
Bending modulus	3800	MPa	ISO 178

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.