TOTAL Polypropylene Lumicene® MR 110MC2

About
Lumicene® MR110MC2 is a metallocene random copolymer with a Melt Flow Index of 110 g/10 min for injection moulding. This Lumicene® MR110MC2 high fluidity differs from standard random copolymers by its moulding reproducibility, outstanding organoleptic properties combined with low extractables, excellent transparency and gloss, high rigidity combined with superior impact resistance. Producers of rigid food packaging, caps and closures, medical device and packaging, houseware and kitchenware, and more generally of thin wall packaging, will take full advantage of the new Lumicene® random metallocene product range. We hereby confirm that we do not use peroxide in the manufacturing of the above-mentioned Product.&&

About

Lumicene® MR110MC2 is a metallocene random copolymer with a Melt Flow Index of 110 g/10 min for injection moulding. This Lumicene® MR110MC2 high fluidity differs from standard random copolymers by its moulding reproducibility, outstanding organoleptic properties combined with low extractables, excellent transparency and gloss, high rigidity combined with superior impact resistance. Producers of rigid food packaging, caps and closures, medical device and packaging, houseware and kitchenware, and more generally of thin wall packaging, will take full advantage of the new Lumicene® random metallocene product range. We hereby confirm that we do not use peroxide in the manufacturing of the above-mentioned Product.&&

Product Description
Supplier	TOTAL
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good Rigidity,Good Clarity,Low extract,Good surface appearance,High impact resistance,High liquidity,Good sensory characteristics.,Random copolymer
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.902	g/cm³	ISO 1183
Apparent density	0.53	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	110	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	1300	MPa	ISO 527-2
tensile strength
yield	31.0	MPa	ISO 527-2
Tensile strain
yield	10	%	ISO 527-2
Bending modulus	1250	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	5.0	kJ/m²	ISO 180

THERMAL	Nominal value	Unit	Test method
Melting temperature
DSC	140	℃	ISO 3146

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.