| About |
|---|
| Transparent, ether-based injection moulding and extrusion type Characteristics: Permanent antistatic properties throughout the whole structure – independent of specific environmental conditions.Can be individually colourd, FDA compliant: suitable for food contact, free of PVC and latex. Applications: Components in the electrical and electronic industry tubes and containers for flammable liquids films, delivery and ventilation pipes, tubes, applications in the chemical industry Sensors&& |
| Product Description | |
|---|---|
| Generic | TPU-酯 |
| Material Status | Commercial: Active |
| Features | Conductive,Food contact compliance,Antistatic property,Good coloring |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.20 | g/cm³ | ISO 1183/A |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | < 1.0E+9 | ohms | IEC 60093 |
| Volume resistivity | 1.9E+9 | ohms·cm | IEC 60093 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 85 | ISO 868 | |
| tensile strength | DIN 53504 | ||
| — | 38.5 | MPa | DIN 53504 |
| 10% strain | 3.00 | MPa | DIN 53504 |
| 50% strain | 6.50 | MPa | DIN 53504 |
| 100% strain | 8.60 | MPa | DIN 53504 |
| Tensile strain | |||
| fracture | 590 | % | DIN 53504 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying time | 4.0 | hr | |
| Processing (melt) temperature | 220 to 235 | °C | |
| Mold temperature | 40 to 80 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 7.9 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |