Eltex® MED 240-MS23

About
Eltex® MED 240-MS23 is a highly clarified and lubricated random copolymer with good flow primarily intended for injection moulding. Eltex® MED 240-MS23 is produced according to Good Manufacturing Practices, and is available in granular form. Applications External barrel for disposable syringes (not pre-filled) Transparent thin wall injection moulding Benefits and Features Excellent optical properties Slip agent Good flow&&

About

Eltex® MED 240-MS23 is a highly clarified and lubricated random copolymer with good flow primarily intended for injection moulding. Eltex® MED 240-MS23 is produced according to Good Manufacturing Practices, and is available in granular form. Applications External barrel for disposable syringes (not pre-filled) Transparent thin wall injection moulding Benefits and Features Excellent optical properties Slip agent Good flow&&

Product Description
Supplier	INEOS
Generic	PP copolymer
Material Status	Commercial: Active
Features	Smoothness,Good liquidity,Optical performance,Lubricating,Disposable,Random copolymer
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
230℃，2.16kg	23	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
tensile strength
yield	26.0	MPa	ISO 527-2
Bending modulus
23℃	980	MPa	ISO 178

THERMAL	Nominal value	Unit	Test method
Melting peak temperature	146	℃	ASTM D3418

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.