| About |
|---|
| Medalist MD-50357 is intended for use in medical and healthcare applications, particularly for extruded medical tubing. Medalist MD-50357 is a low density, medium hardness, clear grade designed to be a sustainable alternative to flexible PVC for medical tubing. This grade is suitable for both injection molding and extrusion.&& |
| Product Description | |
|---|---|
| Supplier | Teknor Apex |
| Generic | TPE |
| Material Status | Commercial: Negative |
| Features | Excellent Processability,Good Clarity,High purity,Gamma radiation,ADCF,High pressure disinfection,Resistance to kink,Low density,Ethylene oxide disinfection,Agglomerability |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.888 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 9.0 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ASTM D2240 | ||
| Shore A, 1 second | 60 | ASTM D2240 | |
| Shore A, 5 seconds | 58 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ASTM D412 | ||
| fracture | 9.14 | MPa | ASTM D412 |
| 50% strain | 1.93 | MPa | ASTM D412 |
| 100% strain | 2.31 | MPa | ASTM D412 |
| 300% strain | 3.62 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 750 | % | ASTM D412 |
| tear strength | 36.8 | kN/m | ASTM D624 |
| Compression deformation | ASTM D395 | ||
| 23℃，22 hr | 24 | % | ASTM D395 |
| 70℃，22 hr | 88 | % | ASTM D395 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Extrusion | Nominal value | Unit | Test method |
| Barrel rear temperature | 149 to 171 | °C | |
| Barrel middle temperature | 171 to 193 | °C | |
| Barrel front temperature | 193 to 216 | °C | |
| Nozzle temperature | 193 to 216 | °C | |
| Processing (melt) temperature | 193 to 216 | °C | |
| Mold temperature | 21 to 52 | °C | |
| Back pressure | 0.345 to 1.03 | MPa | |
| Screw speed | 50 to 100 | rpm | |
| Cushion | 3.56 to 25.4 | mm | |
| Barrel 1 zone temperature | 171 to 188 | °C | |
| Barrel 2 zone temperature | 182 to 196 | °C | |
| Barrel 3 zone temperature | 185 to 204 | °C | |
| Barrel 4 zone temperature | 188 to 210 | °C | |
| Barrel 5 zone temperature | 188 to 210 | °C | |
| Nozzle temperature | 188 to 210 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |