K-Prene INSULATION EPR 5088

About
K-Prene INSULATION EPR 5088 is a Melt Processable Rubber (MPR) material. It is available in Africa & Middle East. Important attributes of K-Prene INSULATION EPR 5088 are: Chemical Resistant Good Flexibility UV Resistant Wear Resistant Typical applications include: Wire & Cable Automotive Handles Hose/Tubing&&

Product Description
Generic	MPR
Material Status	Commercial: Active
Features	Weather resistance is good,Good Electrical Properties,Low temperature toughness,Good wear resistance,Solvent resistance
Availabilitys	Africa & Middle East

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.00	g/cm³	ASTM D1505

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	88		ASTM D2240

elastic body	Nominal value	Unit	Test method
tensile strength
yield	15.7	MPa	ASTM D412
Tensile strain
fracture	650	%	ASTM D412
tear strength	56.9	kN/m	ASTM D624

Electrical performance	Nominal value	Unit	Test method
Volume resistivity	1.0E+15	ohms·cm	ASTM D257
Dielectric strength	0.60 to 0.95	kV/mm	ASTM D149

Supplementary information	Nominal value	Unit	Test method
Ozone resistance	Excellent
Using – Temperature	135	℃

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.