| About |
|---|
| Injection Molding Grade, High Flow PPO/PA Alloy Description High Flow, High Heat Resistance Application Electric and Electronic parts&& |
| Product Description | |
|---|---|
| Supplier | LG Chemical |
| Generic | PPO(PPE)+PS+PA |
| Material Status | Commercial: Active |
| Features | High liquidity,High Heat Resistance |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.10 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 285℃，5.0kg | 68 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Yield, 3.20 mm | 62.8 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, 3.20 mm | 40 | % | ASTM D638 |
| Bending modulus | |||
| 3.20 mm | 2350 | MPa | ASTM D790 |
| bending strength | |||
| Fracture, 3.20 mm | 108 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | ASTM D256 | ||
| -30℃，3.2mm | 160 | J/m | ASTM D256 |
| 23℃，3.2mm | 210 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed, 6.4 mm | 186 | ℃ | ASTM D648 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 100 to 120 | °C | |
| Drying time | 6.0 to 8.0 | hr | |
| Recommended maximum moisture content | > 0.050 | % | |
| Barrel rear temperature | 270 to 300 | °C | |
| Barrel middle temperature | 280 to 320 | °C | |
| Barrel front temperature | 280 to 320 | °C | |
| Nozzle temperature | 285 to 325 | °C | |
| Processing (melt) temperature | 280 to 320 | °C | |
| Mold temperature | 50 to 100 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.20 in/min |
| 3. 0.11 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |