| About |
|---|
| Terraloy BP-13000A is a Thermoplastics Starch/PP ready-to-process compound that contains up to 30% of TPS renewable content. This compound is intended for injection molding as well as extrusion applications.&& |
| Product Description | |
|---|---|
| Supplier | Teknor Apex |
| Generic | TPS+PP |
| Material Status | Commercial: Active |
| Features | Renewable resources |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.995 | g/cm³ | ASTM D792 |
| Biomass content | < 30.0 | ||
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 1120 | MPa | ASTM D638 |
| tensile strength | |||
| fracture | 21.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 75 | % | ASTM D638 |
| Bending modulus | |||
| 1% secant | 1060 | MPa | ASTM D790-B |
| bending strength | |||
| 5% strain | 32.5 | MPa | ASTM D790B |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 66 | J/m | ASTM D256 |
| Notched impact strength of cantilever beam | 1200 | J/m | ASTM D4812 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |