Altuglas® BS 572

About
ALTUGLAS®BS 572 is a pure methylmethacrylate polymer with very high molecular weight in the form of spherical particles (beads) with large size. Because of its large size and composition, ALTUGLAS®BS 572 is able to provide really interesting rough surface effects when compounded in other thermoplastic polymers (film, extrusion…).ALTUGLAS®BS 572 can give special surface effects as additive in Waterborne and UV coatings.Due to its high molecular weight, ALTUGLAS®BS 572 can be used as special Binder (glues, solvent hard topcoat…).&&

Product Description
SupplierTrinseo
Material StatusCommercial: Active
FeaturesHigh purity,Ultra high molecular weight,Low smoothness
AvailabilitysEurope,Asia Pacific

Technical Data
PHYSICALNominal valueUnitTest method
Apparent density0.70g/cm³
acid valuemg KOH/g
Intrinsic viscosity1.6 to 1.8dl/g
Particle size300µm

THERMALNominal valueUnitTest method
Glass transition temperature118

Supplementary informationNominal valueUnitTest method
Residual monomer%
volatility%

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.